Selection Guide

Given the specific conditions of deserts, PE100 black material with sufficient carbon black for UV resistance shall be prioritized. It must not be exposed to direct sunlight, and shall be covered with opaque tarpaulins.

What size generator do you think is required to keep this machine running stably?

Common hand-held fusion welders for PPR pipes include DN20-32, DN20-63 and DN75-110 models. For PPR pipes larger than DN160, butt fusion or electrofusion welding may be used.

Compare Welping A Pro, A Max, and FX butt fusion machine series to understand the differences in structure, hydraulic systems, and applications, and choose the right HDPE welding solution.

This article explains how to choose a 1200mm butt fusion welding machine for large PE and HDPE pipe projects. It covers key factors such as working range, frame stability, pipe clamping, facer performance, heating plate uniformity, hydraulic control, and long-term manufacturer support.

Pipe straps and pipe hangers serve different roles in piping systems.

Pipe straps are designed for direct surface fixing in light-duty applications, while pipe hangers provide stronger, adjustable support for suspended and heavier piping systems.

Selecting the right option depends mainly on installation method and load requirements.

Which welding machine is suitable?

This article provides a practical overview of common pipe support solutions, including pipe straps, hangers, and riser clamps. It explains their typical structures, applications, and key differences. By understanding how each type is used in different installation conditions, users can make more informed choices to ensure stability, safety, and long-term performance in piping systems.

CM-12 and CM-20 are two electric hydraulic pipe cutters designed for different pipe sizes and working environments. While both machines use the same cold-cutting principle and hydraulic feeding system, CM-12 focuses on efficient cutting of small to medium pipes in workshops, whereas CM-20 is built for larger pipes and job-site conditions requiring stronger support and mobility.