Product News | Introducing the Welping E2 Series Push-Operated Manual Butt Fusion Machines
- Share
- publisher
- RUBR
- Issue Time
- Oct 27,2026
Summary
Welping introduces the E2 Series push-operated manual butt fusion machines for 40–250 mm PE/PP pipes. Four models combine manual push operation, a gear-driven facing tool and built-in digital temperature control.
The Welping E2 Series push-operated manual butt fusion machines are now available for 40–250 mm PE/PP pipes. The range includes four models: WP110E2, WP160E2, WP200E2 and WP250E2.
Featuring manual push-handle operation, a gear-driven facing tool and a heating plate with built-in digital temperature control, the E2 Series provides a practical setup for pipe-end preparation, heating and joining.
Manual Push Operation, Compact Design
The E2 Series uses a push handle to move the carriage, bringing the pipe ends together or separating them. Its compact design makes the machine convenient to handle, transport and position on site.
The main difference between the E2 Series and Welping’s C Series is carriage operation: the E2 Series uses a push handle, while the C Series uses a hand crank. Corresponding models have essentially the same technical specifications, allowing customers to choose according to their operating preferences and application needs.
Gear-Driven Facing Tool
The E2 Series features a fully gear-driven facing tool for pipe-end preparation before welding. The geared transmission delivers smooth, reliable operation during facing.
Corresponding E2 and C Series models use the same facing tool configuration.
Built-in Digital Temperature Control
The heating plate features a digital temperature controller integrated into its handle. Operators can check the temperature directly on the display and adjust the setting using the panel buttons.
This integrated design makes temperature setup and monitoring convenient.
Four Models for 40–250 mm Pipes
| Model | Welding Range |
| WP110E2 | 40–110 mm |
| WP160E2 | 63–160 mm |
| WP200E2 | 63–200 mm |
WP250E2 | 63–250 mm |
Interchangeable reducing inserts accommodate different pipe diameters within each model’s welding range. Standard insert sizes, power supply requirements and power ratings are listed on the product page.
Explore the E2 Series
The E2 Series offers another option for customers who prefer manual push operation for PE/PP pipe butt fusion.
Visit the E2 Series product page for complete specifications and product images. You can also contact us with your pipe diameter, material, SDR or wall thickness, and power supply requirements for help selecting the appropriate model and inserts.