HC-1X Electric 114mm Pipe Hole Cutting Machine Up To 4"
- Model
- HC-1X
Item specifics
- Cutting Capacity
- Up To 4" (114mm)
- Pipe Mounting Capacity
- 1 1 /4" - 8" (32mm-200 mm)
- Drill Chuck Capacity
- 1 /16" - 5/8" (2mm-16 mm)
- Drill Chuck Speed
- 240RPM
- Power
- 1800W
- Current Draw Rating
- 8 Amps @ 220-240V / 15 Amps @ 120V
- Weight
- 28 lbs. (12.8 Kg)
Review
Description
HC-1X Pipe Hole Cutting Machine
1"-4" Steel Pipe Hole Cutting Machine
Pipe Hole Cutting Machine Features
● The Model HC-1X Pipe Hole Cutter is designed to cut holes up to 4" into steel pipe.
The HC-1X has a 5/8" capacity drill chuck to accommodate all sizes of hole saws and hole saw arbors. An integral motor and gear-reduction optimize the performance of large-diameter hole saws.
● The two feed handles allow the operator to use the Pipe HoleCutter from either the left or right side. A rotating leveling vial in the base allows repeated holes to line up.
● Only 11" high, the compact design, allows the HC-1X to be used in tight quarters or above in-stalled pipe close to ceilings.
Pipe Roll Grooving Machine Parameter
|
Model:
|
HC-1X
|
|
Applicable Naterials:
|
Carbon Steel Pipes, PE Pipes
|
Cutting Capacity: |
up to 4"(114mm) |
Pipe Mounting Capacity: | 1 1/4"- 8"(32mm-200 mm) |
Drill Chuck Capacity: | 1/16"- 5/8"(2mm-16 mm) |
Drill Chuck Speed: | 240RPM |
Current Draw Rating: | 8 Amps @ 220-240V 15 Amps @ 120V |
Height: | 10.63" (27 cm) |
Length: | 12.59" (32 cm) |
Width: | 11.02" (28 cm) |
Weight: | 28 lbs. (12.8 Kg) |
Packing Size: | 37*33*34cm |
Ordering Information
|
Catalog No.
|
Phase
|
Power
|
Voltage
|
Frequency |
|
910020
|
Single
|
700W
|
220V
|
50/60HZ |
|
910021
|
Single
|
700W
|
110V
|
50/60HZ |
Pipe Hole Cutting Machine Configuration
Powerful Drive
An 1800W motor with gear reduction delivers 240 RPM for large-diameter hole cutting.
Versatile Capacity
Suitable for 32–200 mm steel pipes, with a maximum hole diameter of 114 mm and a 2–16 mm drill chuck capacity.
Feed from Either Side
Dual feed handles allow convenient operation from either side of the machine.
Compact Design
At just 27 cm high, the compact body fits confined spaces and installed pipes close to ceilings.
Alignment Aid
A rotating level vial in the base helps keep successive holes aligned.
Easy to Carry
Weighing approximately 12.8 kg, the machine includes a carry handle for convenient transport on site.
HC-1X Workshop & Production
Resources of HC-1X Roll Grooving Machine
HC-1X Workshop & Production
What Can We Do For You?
Our Service
WELPING develops, manufactures and sells equipment and systems for welding thermoplastics, consciously focusing on pipe systems as its main application area in this area. Since 2005, we have been in this field for more than 17 years.
Our goal is to help build your reputation by combining industrial-grade design, performance and quality to provide specialized solutions for a variety of mining and industrial, marine, municipal, irrigation, energy and landfill sites.
WELPING strives to be a provider of all things thermoplastic piping, including welding equipment and certified technical training to assist with the installation and fabrication of any plastic piping related project. WELPING continues to expand the supply and use of polyethylene pipe, valve and fitting system designs into new market segments. In addition, we help customers purchase plumbing tools to support their projects. Our success lies in the quality of our products and the knowledge and service of our employees.