Troubleshooting

Do you really know your PE electrofusion welding machine?

Do not use electrofusion fittings in case of jetting, short circuit, or other similar abnormal conditions.

What should I do if the hydraulic butt welding machine fails to hold pressure?

What are the consequences of incorrect phase sequence connection for 380V three-phase power supply?

With the 380V hydraulic power unit, the milling cutter begins to move when the forward/reverse valve is actuated.

Jerky movement of a butt fusion machine may be caused by air trapped in the hydraulic hose. This guide explains the cause and shows how to remove air from the hydraulic system step by step.