All

A simple step-by-step guide to adjusting hydraulic pressure on A and A Pro butt fusion machine hydraulic units before operation.

The differences between the A-max series butt welding machines and the A series welding machines.

A quick guide to the difference between FX and A / A Pro hydraulic units when measuring drag pressure, including when the pressure value should be read.

This article explains why clamp insert design changes as butt fusion machine size increases, including differences in contact area, clamping stability, one-piece structures, widened inserts, and aluminum clamp design for large HDPE pipe welding.

A quick comparison of the standard analog pressure gauge and optional digital pressure gauge used on FX Series hydraulic units, including their differences in readability, accuracy, and performance during a power failure.

Welping B-series butt welding machines consist of the frame (including fixtures),facer, heating plate, lifting basket and tools.

Before milling the PE pipe orifice, clean it with clean water or a wet wipe to prevent small stones from damaging the face of the milling cutter.

What size generator do you think is required to keep this machine running stably?

What does each digit on the barcode of an electrofusion fitting mean?

The hydraulic quick coupler is an important connection component in the hydraulic system of a butt fusion welding machine. If the coupler becomes worn, damaged, or needs to be replaced during routine maintenance, the replacement process is actually very simple.

PE Pipe - Commonly Used Chinese Execution Standards (Current)

A PE butt fusion welding machine is used to butt-join pipes directly; it is not for dragging pipes. For example, I welded 50 meters at Location 1 and 50 meters at Location 2. I want to connect the pipes from the two locations together. How can I do it?

Do not use electrofusion fittings in case of jetting, short circuit, or other similar abnormal conditions.

PE pipes cannot be directly heat-fused to PPR or iron pipes. Depending on pipe size and service conditions, use brass-insert transition fittings, threaded adapters, flange connections, push-in connectors, steel-plastic transitions, or clamp couplings.